Table 5.1
Paper Jam Messages (continued)
Message
Stapl Fail H5-92
Power Off/On
Stapl Fail H5-93
Power Off/On
Stapl Fail H5-94
Power Off/On
Stapl Fail H5-95
Power Off/On
Stapl Fail H5-96
Power Off/On
Stapl Fail H5-97
Power Off/On
Description/Corrective Action
The Staple Head did not switch ON within the specified time. Power OFF and
ON the printer.
The Stapler Failed in the Front Corner position. Power OFF and ON the
printer.
The Stapler Failed in the Front Straight position. Power OFF and ON the
printer.
The Stapler Failed in the Rear Straight position. Power OFF and ON the
printer.
The Stapler Ready Sensor did not go back ON after the staples were refilled,
or stapling was unsuccessful. Power OFF and ON the printer.
The End Wall Sensor of the finisher did not go on ON or OFF within the
specified time. Power OFF and ON the printer.
Table 5.1 Page 7 of 7
Chapter 5: Troubleshooting
Paper Jams
5-13