Tera Gear 13 01 3008TG Assembly Instructions And Owner's Manual page 23

Assembly
STEP 19
D. Insert the nozzle of the
Side Burner Valve into the supply pipe
of the Side Burner. Once aligned tighten
the two screws on the Side Burner (10)
that were loosened in step 19-A to the
Side Burner Assembly (9).
IMPORTANT: Make sure that the valve nozzle
is properly inserted and aligned.
E. Adust the Side Burner Control Panel (11) so
that it is aligned with the front of the Main Control
Panel of the Fire Box Assembly (1). Attach the Side
Table Control Panel to the Fire Box Assembly using
two M6x12mm Bolts (A). Tighten the Bolts with the
screwdriver.
A x2
TG3008 NG U&C-2012 FA.indd 23
11
23
9
10
9
10
12-09-26 4:36 PM