Tera Gear 13 01 3008TG Assembly Instructions And Owner's Manual page 14

Assembly
STEP 9
Attach the Door Transom (20) to the Left Front Leg (16)
and Right Front Leg (18) using two
M6x40mm Bolts (D).
Tighten the bolts with the screwdriver.
D x2
STEP 10
A. Ensure the brakes on the locking casters are firmly in the locked "on" position before continuing.
B. Use this opportunity to make sure all the screws are tight and the frame is square because some
screws may loosen during assembly.
STEP 11
Attach the two Door Handles (25)
to the Left Front Door (23) and the
Right Front Door (24) using
M5x8mm Bolts (C).
Tighten the bolts with
the screwdriver.
C x2
TG3008 NG U&C-2012 FA.indd 14
18
23
25
14
20
16
24
25
12-09-26 4:36 PM