Mounting Procedure - Raymarine ST70+ Installation Manual

Chapter 2: Installation

Mounting procedure

Illustrations showing how to surface mount and flush mount an ST70+ display are
given at Figure 2-3: and Figure 2-4: respectively. Keypads are mounted in a similar
manner except they connect only to SeaTalk
cable connection.
To mount an ST70+ display or keypad:
1. Use the appropriate flush- or surface-mount template to cut the mounting slot for
the display and to drill holes for the fixing screws.
2. Clean and de-burr the mounting surface.
3. Fit gaskets and brackets.
Note:
Stick the self-adhesive side of the gasket to the display or keypad, NOT to the mounting location.
Surface mounting
Figure 2-3: Surface mounting a display
ng
and do not have an additional power
13
D11390-1