Using The Wizard For Basic Configuration - HIKVISION DS-7200 User Manual

User Manual of DS-7200/7300/8100 Series DVR

2.1 Using the Wizard for Basic Configuration

The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard
starts once the device has loaded.
Operating the Setup Wizard:
1. Select the system resolution from the drop-down menu. The default resolution is 1280× 1024/60Hz.
Click Apply to save the resolution settings.
By default, the system resolution is set to 1280× 1024.
2. Check the checkbox to enable Setup Wizard when device starts. Click Next to continue the setup
wizard.
You can also click Cancel to exit the Setup Wizard, or use the Setup Wizard next time by leaving the
"Start wizard when DVR starts?" checkbox checked and exit.
Figure 2. 1 Start Wizard Interface
Figure 2. 2 Start Wizard Interface
30