Checking Network Status - HIKVISION DS-7200 User Manual

User Manual of DS-7200/7300/8100 Series DVR
3. Select the backup device from the dropdown list of Device Name.
Click the Refresh button if the connected local backup device cannot be displayed. When it fails to
detect the backup device, please check whether it is compatible with the device. You can format the
backup device if the format is incorrect.
4. Click the Export button to start exporting.
5. After the exporting is complete, click OK to finish the packet export.
Up to 1M data can be exported each time.

9.4.3 Checking Network Status

Purpose:
You can also check the network status and quick set the network parameters in this interface.
Steps:
Click Status on the right bottom of the page.
Figure 9. 42 Export Network Packet
Figure 9. 43 Packet Export Attention
168