Managing Hdd Group; Setting Hdd Groups - HIKVISION DS-7200 User Manual

User Manual of DS-7200/7300/8100 Series DVR

10.3 Managing HDD Group

10.3.1 Setting HDD Groups

Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD
group through HDD settings.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
2. Set the Mode to Group, as shown below:
The IP Camera is supported by HDVR series only.
3. Click the Apply button and the following Attention box will pop up.
4. Click the Yes button to reboot the device to activate the changes.
5. After reboot of device, enter the HDD Information interface.
Figure 10. 9 Storage Mode Interface
Figure 10. 10 Attention for Reboot
177