Deleting A User - HIKVISION DS-7200 User Manual

User Manual of DS-7200/7300/8100 Series DVR
•
Local Camera Management: Enabling and disabling analog camera (s). Adding, deleting and
editing of network camera (s). This function is supported by HDVR series.
•
Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD
property), upgrading system firmware, clearing I/O alarm output.
•
Local Shutdown /Reboot: Shutting down or rebooting the device.
Remote Configuration
•
Remote Log Search: Remotely viewing logs that are saved on the device.
•
Remote Parameters Settings: Remotely configuring parameters, restoring factory default
parameters and importing/exporting configuration files.
•
Remote Camera Management: Remotely enabling and disabling analog camera (s), and adding,
deleting and editing of network camera (s). This function is supported by HDVR series.
•
Remote Serial Port Control: Configuring settings for RS-485 ports.
•
Remote Video Output Control: Sending remote control panel signal.
•
Two-Way Audio: Realizing two-way radio between the remote client and the device.
•
Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote
client) and controlling the alarm output.
•
Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting
HDD property), upgrading system firmware, clearing I/O alarm output.
•
Remote Shutdown/Reboot: Remotely shutting down or rebooting the device.
Camera Configuration
•
Remote Live View: Remotely viewing live video of the selected camera (s).
•
Local Manual Operation: Locally starting/stopping manual recording, picture capturing and
alarm output of the selected camera (s).
•
Remote Manual Operation: Remotely starting/stopping manual recording, picture capturing and
alarm output of the selected camera (s).
•
Local Playback: Locally playing back recorded files of the selected camera (s).
•
Remote Playback: Remotely playing back recorded files of the selected camera (s).
•
Local PTZ Control: Locally controlling PTZ movement of the selected camera (s).
•
Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s).
•
Local Video Export: Locally exporting recorded files of the selected camera (s).
You should select the camera (s) on the Camera Configuration interface for the operation permission
configured.
7. Click the OK button to save the settings and exit interface.
Only the admin user account has the permission of restoring factory default parameters.

13.5.2 Deleting a User

Steps:
1. Enter the User Management interface.
Menu > Configuration > User
2. Select the user to be deleted from the list.
206