User Manual of DS-7200/7300/8100 Series DVR
9.2.2 Configuring PPPoE Settings
Purpose:
Your device also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Steps:
1.
Enter the Network Settings interface.
Menu > Configuration > Network
2.
Select the PPPoE tab to enter the PPPoE Settings interface.
3.
Check the PPPoE checkbox to enable this feature.
4.
Enter User Name and Password for PPPoE access.
The User Name and Password should be assigned by your ISP.
5.
Click the Apply button to save and exit the interface.
6.
After successful settings, the system asks you to reboot the device to enable the new settings, and the
PPPoE dial-up is automatically connected after reboot.
You can go to Menu>Maintenance>System Info>Network interface to view the status of PPPoE
connection. Please refer to Chapter 12.1Viewing System Information for PPPoE status.
9.2.3 Configuring NTP Server
Purpose:
A Network Time Protocol (NTP) Server can be configured on your device to ensure the accuracy of system
date/time.
Steps:
1.
Enter the Network Settings interface.
Menu > Configuration > Network
2.
Select the NTP tab to enter the NTP Settings interface.
Figure 9. 16 PPPoE Settings Interface
Figure 9. 17 PPPoE Settings Interface
155