Checking Hdd Status - HIKVISION DS-7200 User Manual

User Manual of DS-7200/7300/8100 Series DVR

10.5 Checking HDD Status

Purpose:
You may check the status of the installed HDDs on device so as to take immediate check and maintenance in case
of HDD failure.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General
2. Check the status of each HDD which is displayed on the list.
If the status of HDD is Normal or Sleeping, it works normally. If the status is Uninitialized or Abnormal, please
initialize the HDD before use. And if the HDD initialization is failed, please replace it with a new one.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the System Information interface.
Menu > Maintenance > System Info
2. Click the HDD tab to view the status of HDD displayed on the list.
Figure 10. 17 View HDD Status (1)
Figure 10. 18 View HDD Status (2)
181