Led Patterns - Revolabs Executive Elite 01-ELITEEXEC8 Installation And Operation Manual

LED patterns

The following table shows activities associated with the various states shown
by microphone or adapter mute LEDs.
Equipment Use
Microphone in
Charger Base
Microphone not in
Charger Base
Base DSP Station
Microphone LED
Channel LEDs
Solid yellow Off
Solid red Off
Solid green Off
2 RED flashes every 2 RED flashes
second every second
Off Off
Off Off
Two red flashes Two red flashes
every 1.5 seconds every 1.5 seconds
One green flash One green flash
every 1.5 seconds every 1.5 seconds
One red flash every One red flash
1.5 seconds every 1.5 seconds
Solid red Solid red
Alternating slow
green and red
Alternating slow Off
green and red
Alternating red, Off
yellow, green, yellow
2 RED flashes every 2 RED flashes
second every second
Groups of five rapid Off
RED flashes
One yellow flash
every 10 seconds
Meaning
Battery Type Test
Charging in Progress
Charging Complete
Microphone is upgrading its
firmware over the air.
Non-Rechargeable Batteries
Microphone powered off or
battery discharged
Microphone paired and
muted
Microphone paired and "live"
(unmuted)
Microphone paired and
system muted
(ex: tabletop mute)
Pairing mode or
confirmation of powering-
down.
Pairing failed
Microphone not paired
Searching for a connection,
or out of radio range. The
Microphone will try to re-
establish the link for about
15 minutes, and then turn
off automatically.
Microphone is upgrading its
firmware over the air.
Unit is faulty. Contact your
AV service provider for
advice.
Microphone is in Sleep
mode.
93