Surround Assembly And Installation - Pacific energy Alderlea T5 Insert Installation And Operating Instructions Manual

Fig. # 25
SPEED CONTROL
8) Route cable from speed control to fan and reattach wire support
tabs on the underside of the ash lip. Note wire positions.
(Fig.26 & Fig.27)
9) Reconnect the wires to the fans (Fig.28) and re-attach thermal
snap switch (Fig.29). Refi t ash lip, sides and top. Ensure that
the power cable is correctly routed through the surround and
it is not touching the fi rebox side (Fig #30). Wire placement
Fig. # 26
WIRE SUPPORT TABS
Fig. # 27
©PACIFIC ENERGY FIREPLACE
18
PRODUCTS LTD.

Surround Assembly and Installation

1) Remove crate and all plastic packaging.
ASHLIP BRACKET
Fig. # 28
Fig. # 29
Fig. # 30
is important to prevent damage to wires.
THERMAL
SWITCH
ALT5.ASCINSB 150714-24