Screen Messages - Infopia Element compact User Manual

2. Open the battery compartment lid on the back of the meter and remove the
batteries and replace them with two new CR2032 batteries. Make sure to
align the + side facing up toward you. Once the new batteries are in place,
snap the battery lid back onto the meter.
51

Screen Messages

Messages Descriptions
The meter has detected a
problem with the test strip. The
test strip is either used or
damaged.
The blood sample was
applied to the test strip before
the blood symbol ( )
appeared on the screen.
Solutions
Repeat the test with a new
test strip.
Remove and discard the test
strip and insert a new one.
Apply blood to the test strip
after the blood symbol
appears on the screen.
52