How To Switch Between Preview And Program - RGBlink MVP 8043 User Manual

5. System Setup and Operations

How to Switch Between Preview and Program

How to Switch Between Preview and
Program
1. Boot the system default DVI1 to the current input source (key lights),
LCD displays as follows:
2. Choose any other signal, for example, DVI2, DVI2 button flashes,
red frame of HDVI2 corresponding image flashes, and the image is in
Preview state.
3. Push TAKE, DVI2 key lights, and it is switched to Program output,
and the former DVI1 key blinks. red frame of DVI1 corresponding
image flashes, the image is in Preview state.
The same method, it can realize the preview and program switching
among DVI3, DVI4, SDI1, SDI2, SDI3, SDI4.
MVP 8043
Take operation
DVI 1: 1280×1024×75
DVI 2: 1920×1080×60
User Manual 74