How To Use Black - RGBlink MVP 8043 User Manual

5. System Setup and Operations

How to Use BLACK

How to Use BLACK
BLACK description:
BLACK signal realizes one-key-touch to a black screen.
MVP 8043 BLACK provides effect processing on Program output and
Preview output, BLACK uses fade in fade out effect. Operations are as
follows:
1. Choose output signal.
2. Push BLACK button, key light blinks.
3. Then push TAKE button, BLACK key light, then output switch to black
with fade in fade out effect, as shown below:
4. Again push TAKE button, BLACK key flashes, and return to output image.
MVP 8043 User Manual 72