Additional Settings Through Connection To The Admin Page - Speco Intensifier OiD4 User Manual

O i D 4 U s e r ' s G u i d e
O i D 4 U s e r ' s G u i d e
4.2.4.

Additional settings through connection to the Admin Page

All parameters of the camera are factory default out of the box. For a more sophisticated target application,
parameters need to be changed through the admin page. The admin page can be connected through
"http://IP_Address:Port_Number/admin.htm"
ID and password of the administrator are required. Default ID and password are
It is highly recommended to change the ID and password to prevent illegal access to the IP camera.
For more detailed information, Please refer to the "Setup Guide".
Rev.1.0.2 (Jul. 2014)
"admin", "1234".
20