External Connector; Factory Default Switch - Speco Intensifier OiD4 User Manual

O i D 4 U s e r ' s G u i d e
O i D 4 U s e r ' s G u i d e
2.3.3.

External Connector

Network (LAN)
Mic/Line Input
2.3.4.

Factory Default Switch

Factory default switch is provided for returning the IP camera to factory default state. Unscrew the cover to
access the switch. There are two functions assigned to factory default switch.
1. Returning to Factory Default State : Press the switch about 5 seconds while power is applied to
return to factory default state.
2. Safe Removal of Micro-SD Card : Press the switch for 1 second to unmount the Micro SD Card for
safe removal.
Micro SD Card slot
Figure 2-4. Factory Default switch and Micro-SD Card slot
Power
Figure 2-3. Connector for external connection
Line Output
Sensor Input (white(+), Red(-))
Relay Output (Black(+), Yellow(-))
Factory Default Switch
Rev.1.0.2 (Jul. 2014)
11