Additional Settings Through Connection To The Admin Page - Speco O2B2 User Manual

O 2 B 2 U s e r ' s G u i d e
O 2 B 2 U s e r ' s G u i d e

4.2.4. Additional settings through connection to the Admin Page

All the parameters of new IP camera follows factory default values. For more sophisticated target
application it is needed to change parameters. The admin page can be connected through
"http://IP_Address:Port_Number/admin.htm"
ID and password of the administrator are required. Default ID and password are
recommended to change the ID and password to prevent illegal access to the IP camera.
information, please refer to the [Configuration_Guide].
admin, 1234. It is highly
For more detailed
Rev.1.11 (Mar. 2014)
21