Recommendation - JTS TG-10STX User Manual

(7.) Adjusting the AF output level
Use the AF output level control located on the
front side of the receiver to adjust the AF signel
level that appears at output.
(8.) DR-900 dual pack adaptor
The dual rack adaptor is available to unify the
half rack space into a standard EIA size with
single or dual units.
(9.) Basic operation
1. Turning the receiver on and off by pressing the POWER button.
2. Press the SET button for 3 seconds to select frequency and scan.
3. Press the SET button again to store once you make any changes.
4. Press the UP or DOWN button to adjust the setting of a menu.