Download  Print this page

Preparing Procedures & Basic Operation - JTS TG-10STX User Manual

Stationary
Hide thumbs

Advertisement

5. Preparing procedures & basic operation
(1.) Power output connector
Plug in one end of AC/DC adaptor cable to DC input socket in the rear
panel of receiver, and plug another end into an AC outlet.(Step 1)
(2.) Audio output connector
Connect one end of the AF output cable to the AF output socket in
the rear panel, then plug another end to the "MIC IN" input socket
of a mixer or amplifier.(Step 2)
TG-10SRX equipped with balanced XLR output and unbalanced Ø6.3mm
output, choose the proper way for use.
(3.) LED panel
1. AF signal
2. RF signal
3. Channel Display
4. Diversity Display
(A or B antenna)
(4.) Setting the rubber pad
Four self-adhesive rubber pads are provided to ensure
the stability.
They are to be placed on the bottom of the receiver.
AF OUTPUT
DCV INPUT
UNBAL .
12-18V/500mA
8
AF OUTPUT
BALANCED
Freq. Range:
Serial No. :
ANT. 2
ANT. 1

Advertisement

loading

  Also See for JTS TG-10STX

  Related Manuals for JTS TG-10STX

This manual is also suitable for:

Tg-10srx