JTS TG-10STX User Manual page 6

(3.) LCD Display
AF Level of CH1
1
AF Level of CH2
2
Monitor channel display
3
Channel display
4
(4.) Attach the antenna
The user-friendly antenna comes with
BNC connector. Connect the antenna
on the rear of the transmitter and align
it upward.
(5.) Power On / Off
Turn on or turn off the transmitter by
pressing the"POWER" button.
(6.) Volume
Adjust the volume to a proper level.
(7.) Monitor Volume
Adjust the monitor volume to a proper
level.
Note that by pushing Monitor Volume
user can choose CH1 / CH2 or CH3
to listen.
(8.) Select channal
1. Press"set"button for about 3 second
and then"."starts flashing on the pannel.
2. Press "+ "or "- "button to increase
or decrease the channel number.
3. Press"set"button again to store the channel.
(9.) Set the rubber pad
Four self-adhesive rubber pads are provided to ensure
the stability.
They are to be placed on the bottom of the transmitter.
(10.) RTF-1 Antenna Extension Cable (Optional)
Antenna extension cable enables front mounting antenna which benefits
the RF effeciency.
AUDIO LEVEL
CH1 CH2
1 2
AUDIO LEVEL
CH1 CH2
POWER
POWER
AUDIO LEVEL
CH1 CH2
POWER
AUDIO LEVEL
CH1 CH2
POWER
POWER
4
3
Monitor
CH1/CH2 CH3
CHANNEL
4
ANTENNA OUT
TG-10STX
Monitor
+
CH1/CH2 CH3
UHF PLL Transmitter
SET
-
CH1 VOLUME CH2
CHANNEL
TG-10STX
Monitor
+
CH1/CH2 CH3
UHF PLL Transmitter
SET
-
CH1 VOLUME CH2
CHANNEL
CH1/CH2 VOLUME
TG-10STX
Monitor
+
CH1/CH2 CH3
UHF PLL Transmitter
SET
-
CH1 VOLUME CH2
CHANNEL
MONITOR
Monitor
+
CH1/CH2 CH3
AUDIO LEVEL
SET
-
CH1 CH2
CH1 VOLUME CH2
CHANNEL
CHANNEL
Monitor
Selector
Monitor
Selector
Monitor
Selector
TG-10STX
UHF PLL Transmitter
Monitor
Selector