Usb Ports; External Scsi Port; Preinstalled Software - Sun Microsystems Sun Fire V210 Getting Started Manual

The default serial connection settings are listed in
TABLE 7
Parameter
Connector
Rate
Parity
Stop bits
Data bits
If you need to connect to the SERIAL MGT port using either a DB-9 or a DB-25
connector, use an adapter to perform the crossovers. See the Sun System Handbook for
more information about the crossovers.

USB Ports

The server has two USB ports for attaching supported devices.

External SCSI Port

The SCSI port is a mulitmode Ultra 160SCSI interface. To operate at Ultra 160SCSI
speeds, the port must be in LVD mode. If a single-ended device is connected to the
server, it automatically switches to single-ended mode.

Preinstalled Software

Your Sun Fire V210 and V240 server is shipped with the Solaris 10 Operating System
(OS) and the Java Enterprise System software. You must configure the preinstalled
software as part of the installation process. However, before you begin the
configuration process, go to:
http://www.sun.com/servers
This site contains the latest information about the preinstalled software and links to
the software updates and patches you must install.
10 Sun Fire V210 and V240 Servers Getting Started Guide • November 2005
Default Serial Connection Settings
Setting
SERIAL MGT or 10101
9600 baud
None
1
8
.
TABLE 7