Storing The Standard Scan Settings - Canon iR3530 Manual

Storing the Standard Scan Settings

You can store your own scan settings as the Standard Scan Settings.
To store your own standard scan settings, specify the desired settings on the Scan screen, then
follow the procedure below. (See "Storing Originals into an Inbox," on p. 2-9.)
1
2
3
6
6-16
Customizing Mail Box Settings
➞ [Mail Box Settings] ➞ [Standard Scan Settings].
Press
Press [Store].
Press [Yes].
To cancel storing the currently displayed settings as the Standard Scan Settings, press [No].
The message <Stored in memory.> appears for approximately two seconds on the touch panel
display.
The displayed settings are stored as the Standard Scan Settings.
NOTE
The settings displayed are the currently set scan settings. Press [
settings that do not fit into the display area.
] or [ ] to display any scan