Canon iR3530 Manual page 92

2
● If you want to select a standard paper size:
2-28
Paper Selection
NOTE
• The paper sizes/types are indicated by icons on the touch panel display, in the order in which
they are loaded in the paper drawers.
• Icons indicating the type of paper loaded in each paper drawer can be displayed on paper
selection screens, if you store that information into the machine beforehand. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)
•
indicates that the paper is set vertically, and
The suffix <R> (such as in A4R) used in paper size designations indicates that the paper is
loaded in a paper drawer or the stack bypass horizontally.
❑
Press [Stack Bypass].
If you want to select the stack bypass when a paper size/type is already selected for the
current or reserved job, press [StackBypass Setting] to specify the desired paper size/type.
❑
Select the desired paper size ➞ press [Next].
NOTE
To select an inch paper size, press [Inch-size].
indicates that the paper is set horizontally.