Specifying The Special Mail Box Features For Scanning - Canon iR3530 Manual

4
5
4

Specifying the Special Mail Box Features for Scanning

1
4-4
What are Special Features?
Set the desired mode.
For more information on setting each mode, see the corresponding section.
To set other modes at the same time, repeat steps 3 and 4.
Press .
If the original is placed on the platen glass, follow the instructions that appear on the touch
panel display ➞ press
once for each original. When scanning is complete, press [Done].
Copying starts.
NOTE
• To cancel this setting, follow the procedure below.
- For modes which have a right triangle ( ) on the bottom right of their key:
Example: Frame Erase
Press [Special Features]
- For modes which do not have a right triangle ( ) on the bottom right of their key:
Example: Job Build
Press [Special Features]
• To cancel all settings and return the machine to the Standard mode, press
Follow the procedure below to specify an inbox.
❑
Select the desired inbox number to display the Document Selection screen.
❑
Press [Scan].
If necessary, see the screen shots in steps 1 to 6 of "Storing Originals into an Inbox," on p.
2-9.
The Scan screen is displayed.
➞ ➞
[Frame Erase] [Cancel]
➞
[Job Build]
.