Canon iR3530 Manual page 220

4
● If you select [Left Margin] or [Right Margin]:
4-36
Margin Mode
IMPORTANT
• If you are using the Margin and Two-sided modes together and copying a document that already
has a margin, follow the instructions below:
- 1 2-Sided: Set the Margin mode for the back only.
- 2 2-Sided: You do not need to set the Margin mode. Proceed to make copies in the usual way.
- 2 1-Sided: Set the Margin mode for the back only.
• If you are using the Margin and Two-sided modes together and copying a document that already
has a left or right margin, follow the instructions below:
- 1 2-Sided: Set the Margin mode for both the front and back.
- 2 2-Sided: Set the Margin mode for both the front and back.
- 2 1-Sided: Set the Margin mode for both the front and back.
NOTE
• The default setting is '10 mm'.
• For instructions on entering values in inches, see Chapter 2, "Basic Operations," in the
Reference Guide.
❑
Press [-] or [+] to set the desired margin width.