Canon iR3530 Manual page 228

● If you want to set the same width for all four borders:
4
● If you want to set the top, left, centre, right, and bottom widths independently:
5
4-44
Frame Erase
NOTE
• The default settings are '10 mm' for [Center] and '4 mm' for [Top], [Left], [Right], and [Bottom].
The maximum book frame erase width that you can set is '50 mm'.
• For instructions on entering values in inches, see Chapter 2, "Basic Operations" in the Reference
Guide.
❑
Press [Sides] and [Center] ➞ press [-] or [+] to set their respective frame erase widths.
❑
Press [Adjust Each Dim.].
❑
Select the desired frame erase borders ➞ press [-] or [+] to set their respective frame erase
widths.
To return to the screen for setting the same width for all four borders, press [Adjust All At
Once].
Press [OK].
The selected mode is set.