Shifting The Original Image; Using The Arrow Keys - Canon iR3530 Manual

Shifting the Original Image

You can make copies with the entire original image shifted to the centre or a corner.
IMPORTANT
• The Shift mode cannot be used with the following mode(s).
- Copy: Image Repeat, Mirror Image
• The Shift (No. Key Entry) mode cannot be used with the following mode(s), in addition to the modes
mentioned above.
- Copy: Image Combination
• The Shift mode cannot be selected if you set the Different Size Originals mode in combination with the
Automatic Paper Selection mode.
• If the original and the copy paper are the same size and the copy ratio is set at 100%, the image of the
original is not shifted.
• The default setting is 'Center'.
• If you use the numeric keys to enter the shift position, the original image may be partially cut off on the
copy, depending on the size of the original, the size of the copy paper, and the amount of shift specified.
NOTE
The Shift mode is available for the Copying function only.

Using the Arrow Keys

The [Center Shift/Corner Shift] setting enables you to use the arrow keys on the touch panel
display to make copies with the entire original image shifted to the centre or a corner.
Copy with the
Original Image
Original
Shifted to the Centre
Copy with the
Original Image
Shifted to a Corner

Shifting the Original Image

4
4-31