Section 1 Quick Reference Guide; Special Characteristics; Unpacking And Installing The Electric Fireplace - Real Flame Barrington 3730 Assembly Instructions Manual

SECTION 1 QUICK REFERENCE GUIDE

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
(1)Before placing your replace, plug it into a convenient outlet to very that the circuit breaker fo r
the outlet is on.
(2)The electric replace may emit a slight, harmle ss odor when rst used. This odor is normal and it
is caused by the initial heating of internal repl ace and will not occur again.
(3)If your electrical replace does not emit heat, consult your instruction manual for further
information.
(4)Use with an ETL or CSA certi ed surge protector.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO USER-SERVICEABLE PARTS INSIDE
HIGH TEMPERATURE
SA1965
CAUTION-HIGH TEMPERATURE, KEEP ELECTRICAL CORDS, DRAPERY,
AND OTHER FURNISHINGS AT LEAST 3 FEET (0.9M) FROM THE FRONT
OF THE HEATER AND AWAY FROM THE SIDE AND REAR
WARNING:
(1)RISK OF FIRE-KEEP COMBUSTIBLE MATERIAL AWAY FROM THE FRONT OF THE
ELECTRICAL FIREPLACE.
(2)SERVICING SHOULD BE DONE ONLY WHILE THE ELECTRIC AL FIREPLACE IS
DISCONNECTED FROM THE POWER SUPPLY.

1.1 SPECIAL CHARACTERISTICS

(1)The glow of the embers hard to distinguish from a real wood burning replace. This heater is
ideal for use all year round, for supplemental heating or for the ambience of the re in warm
weather.
(2)This replace produces a simulative re and hot air ow.

1.2 UNPACKING AND INSTALLING THE ELECTRIC FIREPLACE

(1)Open the packing carefully and remove the replace.
- Remove and discard the plastic bag.
2