Appendix
Technical specifications
Analog corded lobby - A1100
Power requirement
Size
Analog corded 1-line/2-line - A1210/CL-A1110/A1220
Power requirement
Message waiting signal
Speed Dial memory
Size
Analog corded trimstyle - A1310
Power requirement
Message waiting signal
Size
Analog corded trimstyle - A1311
Power requirement
Message waiting signal
Size
Analog cordless 1-line/2-line - A1410/A1420
Frequency control
Transmit frequency
Channels
Nominal effective range
Power requirements
Message waiting signal
Speed Dial memory
Size
Line powered 24V or 48V
Telephone base: 8.66 x 6.02 x 2.56 in (220 x 153 x 65 mm)
Corded handset: 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)
Line powered 24V or 48V
Steady/periodic high voltage pulse or periodic low voltage pulse
Telephone base: up to 10 memory locations; up to 16 digits
Telephone base: 8.66 x 6.02 x 2.56 in (220 x 153 x 65 mm)
Corded handset: 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)
Line powered 24V or 48V
Steady/periodic high voltage pulse or periodic low voltage pulse
Telephone base: 8.54 x 3.11 x 3.23 in (217 x 79 x 82 mm)
Corded handset: 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)
Line powered 24V or 48V
Steady/periodic high voltage pulse or periodic low voltage pulse
Telephone base: 8.72 x 3.02 x 1.84 in (221.6 x 76.8 x 46.85 mm)
Corded handset: 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)
Crystal controlled PLL synthesizer
Handset: 1921.536-1928.448 MHz
Telephone base: 1921.536-1928.448 MHz
5
Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Handset: 2.4V Ni-MH battery
Telephone base: 6V DC @600mA
Steady/periodic high voltage pulse, periodic low voltage pulse, reverse polarity, FSK, Siemens
and/or Panasonic
Telephone base: up to 10 memory locations; up to 32 digits
Telephone base: 8.66 x 6.02 x 2.56 in (220 x 153 x 65 mm)
Handset: 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)
50