Analog Corded Trimstyle - A1311 - VTech A1100 Analog Classic Series User Manual
Analog corded lobby hotel telephone - a1100, analog corded 1-line hotel telephone - a1210/cl-a1110, analog corded 2-line hotel telephone - a1220, analog corded trimstyle hotel telephone - a1310/a1311, analog cordless 1-line hotel telephone - a1410, a
Hide thumbs
Also See for A1100 Analog Classic Series:
- Master user manual (42 pages) ,
- User manual (72 pages)
Table of Contents
Advertisement
Installation
Analog corded trimstyle - A1311
Telephone installation
The telephone comes ready for wall mounting.
1.
Install the telephone base as shown below.
Eyelets
2.
After installing the telephone base, mount it on the wall by positioning the eyelets on the telephone base against the mounting
studs of the wall plate. Then slide the telephone base down on both mounting studs until it locks into place.
Installation option - converting from wall mount to desktop position
1.
Remove the telephone base from the wall and then place it on a flat surface.
2.
Put the corded handset aside. On the telephone base, place a coin in the slit of the wall mount clip and rotate a half turn
(180 degrees). Then replace the handset on the telephone base cradle.
Telephone wall jack
If you have High Speed Internet
Access service, a DSL filter (not
included) is required.
Telephone line cord
Telephone line jack
19
Hide quick links:
Advertisement
Table of Contents
