Telephone Settings; Analog Corded Lobby/1-Line/2-Line - A1100/A1210/Cl-A1110/A1220 - VTech A1100 Analog Classic Series User Manual

Telephone settings

Analog corded lobby/1-line/2-line - A1100/A1210/CL-A1110/A1220

Default settings are indicated by asterisks (*).
Setting
Handset earpiece volume
(for models A1210, CL-A1110 and
A1220 only)
Speakerphone volume
(for models A1210 and A1220 only)
Ringer volume
(for models A1210, CL-A1110 and
A1220 only)
Ringer tone
Flash
(for models A1210 and A1220 only)
Voicemail voltage detection
(for models A1210, CL-A1110 and
A1220 only)
Ringer tone
There are 3 ringer tone options. For 2-line model (A1220), changing the ringer tone of either LINE 1 or LINE 2 applies to both
phone lines.
To change the ringer tone:
1. Turn the telephone base over with the bottom side facing up. Remove the mounting bracket if it is in the desktop position.
Press the tabs of the mounting bracket as the direction indicated below to release and remove the mounting bracket from the
telephone base.
Mounting
bracket
2. Slide the ringer tone switch to select the desired detented position, using a narrow object such as a standard screwdriver.
Ringer tone
switch
3. Install the mounting bracket again to resume its desktop position.
Flash
For 1-line and 2-line models (A1210 and A1220), there are 3 flash duration options that can be programmed.
To change the flash duration:
1. Remove the faceplate and overlay if they are on the telephone base. Press
handset. Then press the recessed PROGRAM key. The MUTE key flashes when in administrator mode.
2. Press FLASH and you hear 3 beeps. Then press a dialing key, 1 (100ms), 2 (300ms) or 3 (600ms), to select the desired flash
duration. Press the recessed PROGRAM key again. You hear 3 rising beeps as confirmation.
Options
1, 2*, 3, 4
1, 2, 3, 4, 5*, 6, 7, 8
Low, Medium*, High
Tone 1*, Tone 2, Tone 3
1 (100ms), 2 (300ms), 3* (600ms)
Disable voicemail voltage detection,
Periodic low voltage pulse detection method,
Steady high voltage and periodic high voltage pulse
detection method
25
Adjustable by:
User and administrator
User and administrator
User and administrator
Administrator only
Administrator only
Administrator only
/SPEAKER on the telephone base or lift the