Analog Corded 1-Line - Cl-A1110 - VTech A1100 Analog Classic Series User Manual

Telephone operation

Analog corded 1-line - CL-A1110

Receive a call
The telephone rings and the MESSAGE WAITING LED flashes when there is an incoming call.
To answer a call:
Lift the corded handset from the telephone base.
Place a call
Lift the corded handset. Listen for a dial tone and then dial the desired number, or press a Speed Dial key to dial a
programmed number.
End a call
Place the corded handset in the telephone
Share a call
During a call, parallel telephones (telephones on the same line) can join the call.
To join a call:
During a call, lift the corded handset to join.
Volume
Listening volume and ringer volume can be adjusted from the telephone base.
To adjust the listening volume:
During a call, press +/- VOLUME to adjust the listening volume. The next call returns to the default listening volume.
To adjust the ringer volume:
At any time, slide the RINGER VOL switch on the right side of the telephone base to adjust the ringer volume.
Call waiting
1. When you hear a call waiting tone during a call, press the switch hook rapidly to put your current call on hold and take the new
incoming call.
2. Press the switch hook rapidly at any time to switch
Data port
You can connect your modem or fax machine to the telephone line through the DATA port.
base.
back and forth between calls.
33