Configuring the Reader
This section shows how to configure the AdaptaScan Reader using
the AdaptaScan Software (Catalog No. 2755-ASN).
The procedures in this section show how to:
configure a bar code label and symbol
define a DeviceNet address
configure the scanner
configure the decoder trigger for ASCII Command Input
configure one character ASCII commands to start/stop scanning
configure the serial port for terminal emulation
define the format and content of messages
Create a New Project
Create a new project named ASCII Command Input for one
AdaptaScan Bar Code Reader (Bar Code Reader 1).
1. Choose New from the Project menu to create a new project.
2. Click the New button to add a bar code reader (Bar Code Reader
1) to the project.
3. Choose Edit from the Project menu to rename the project ASCII
Command Input.
4. Click Save to save the project under the new name and then Close
to return to the Project dialog.
Using ASCII Command Input
2–3
Publication 2755-6.8