Overview
Hardware Requirements
Software Requirements
Related Publications
Using ASCII Command Input
This application describes how to configure an AdaptaScan Bar
Code Reader to receive ASCII commands from a terminal emulator
over an RS-232 link:
Terminal Emulator in Windows 3.1
HyperTerminal in Windows 95
One character ASCII commands trigger the reader to start/stop
scanning. For each trigger command the reader receives, it echoes a
bar code string on the emulator.
The application includes the necessary cable diagrams and
configuration information for the AdaptaScan Bar Code Reader.
The hardware items required for this application are:
2755-SN3, -SN5 or -SN8 AdaptaScan Bar Code Reader
2755-NB40 or -NB41 Wiring Base
2755-NC43 or -NC48 Configuration Cable
2755-PW46 or -PW47 Power Supply
Computer running Windows 3.1 (or later) or Windows 95
9-to-25 Pin Adapter (for computers with a 25-pin COM port)
The software requirements for this application are:
2755-ASN AdaptaScan Offline Programming Software
Terminal Emulator in Windows 3.1 or HyperTerminal in
Windows 95
Publications you may want to refer to include:
Publication
Description
2755-837
AdaptaScan Bar Code Readers User Manual
2755-838
AdaptaScan Software User Manual
2
Chapter
Publication 2755-6.8