Configuring the Reader
This section shows how to configure the AdaptaScan Reader using
the AdaptaScan software (Catalog No. 2755-ASN).
The procedures in this section show how to:
configure a bar code label and symbol
define a DeviceNet address
configure the scanner
configure the decoder trigger
configure the discrete input module
configure the match table, package and autoload trigger source
Create a New Project
1. Select New from the Project menu to create a new project.
2. Click the New button to add a bar code reader (Bar Code Reader
1) to the project.
3. Choose Edit from the Project menu to rename the project
AutoLoad.
4. Click Save to save the project under the new name and then click
Close to return to the Project dialog.
Using the Auto-Load Function
1–3
Publication 2755-6.8