Downloading Application Using The Internal Df1 Driver - Allen-Bradley 2755-SN3 Application Manual

17–18 Communicating with PanelView 900t Terminals on a DeviceNet Network
Downloading Applications
over a Serial Link
Open the application you want to download.
Choose Download from the Application menu.
Select the Download parameters.
Select Operator Terminal
Select Internal DF1 Driver
Shows DF1 driver is
active on COM1 port
Enter name of .PVA file in which to
save the translated .PBA file
Application is validated and translated to a .PVA file.
If errors or warnings are detected, the Exceptions dialog opens.
You must correct errors before download can proceed.
PanelBuilder Software and terminal display status of download.
'TEST.PVA'
Terminal resets, verifies and starts application.
Publication 2755-6.8
To download a DeviceNet application from your computer to the
PanelView 900 terminal over an RS-232 link:
connect computer to RS-232 port of PanelView terminal
download application from the PanelBuilder Application menu
Use PanelBuilder's internal DF1 driver or the DF1 INTERCHANGE
driver for the download. The internal DF1 driver uses fixed DF1
settings that match those of the RS-232 port of the terminal.

Downloading Application using the Internal DF1 Driver

Click OK when done
Setup button is
active if more than
one COM port is
available to DF1
driver.