Configure A Package - Allen-Bradley 2755-SN3 Application Manual

1–8 Using the Auto-Load Function
Publication 2755-6.8

Configure a Package

When the application is running, the I/O 1 LED energizes (no output
module is actually installed in wiring base) when a No-Match or
No-Read occurs. The following procedure defines this package
function.
1. From the Match Table dialog, click the Package button to open
the Packages dialog.
2. Click the New button to create a package.
3. Under Mode, select No-Read or No-Match.
4. Select Match 1 under Match Functions.
5. Click OK to return to the Packages dialog.