Using The Auto-Load; Overview; Hardware Requirements; Software Requirements - Allen-Bradley 2755-SN3 Application Manual

Overview

Hardware Requirements

Software Requirements

Related Publications

Using the Auto Load Function
This application describes how to set up the AdaptaScan Bar Code
Reader to use the Auto-Load function. The application uses a
R
PHOTOSWITCH (Catalog No. 42SRU-6203) as a package
detector to trigger the decoder and a discrete input to activate the
Auto-Load.
The hardware items required for this application are:
2755-SN3, -SN5 or -SN8 AdaptaScan Bar Code Reader
2755-NB40 or -NB41 Wiring Base
2755-PW46 or -PW47 Power Supply
2755-NC43 or -NC48 Configuration Cable
PHOTOSWITCH 42SRU-6203
2755-IB5S DC Input Module
Computer running Windowst 3.1 (or later) or Windows 95
9-to-25 Pin Adapter (for computers with a 25-pin COM port)
The software requirements for this application is the 2755-ASN
AdaptaScan Offline Programming Software.
Publications you may want to refer to include:
Publication Description
2755-837 AdaptaScan Bar Code Readers User Manual
2755-838 AdaptaScan Software User Manual
1
Chapter
Publication 2755-6.8