Transferring Custom Picture Files - Canon XF205 Instruction Manual

Custom Picture Settings
3 Press the MENU button to exit the menu.
134

Transferring Custom Picture Files

You can transfer custom picture files between the camcorder and SD card. When the selected custom picture
file is in the camcorder, use [Copy To
Similarly, when the selected custom picture file is on an SD card, use [Copy To Cam.] or [Load From Cam].
Copying a File from the Camcorder to an SD Card
1 After selecting a file in the camcorder, open the [Copy To
[+ / Transfer File] > [Copy To
2 Select the file slot on the SD card under which to save the file and then
press SET.
• If there are available slots, you can select [New File] to save the file in the first available slot.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the SD card, overwriting the file in that slot.
When the confirmation screen appears, press SET.
4 Press the MENU button to exit the menu.
Replacing a File in the Camcorder with a File on an SD Card
1 After selecting a file in the camcorder to replace, open the
[Load From
[+ / Transfer File] > [Load From
2 Select the file to transfer to the camcorder and then press SET.
3 Select [OK] and then press SET.
• The file in the camcorder will be overwritten by the one on the SD card. When the confirmation screen
appears, press SET.
4 Press the MENU button to exit the menu.
Copying a File from an SD Card to the Camcorder
1 After selecting a file on the SD card, open the [Copy To Cam.]
submenu.
[+ / Transfer File] > [Copy To Cam.]
2 Select the file slot under which to save the file and then press SET.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the camcorder, overwriting the file in that
slot. When the confirmation screen appears, press SET.
4 Press the MENU button to exit the menu.
Replacing a File on an SD Card with a File in the Camcorder
1 After selecting a file on the SD card to replace, open the
[Load From Cam.] submenu.
[+ / Transfer File] > [Load From Cam.]
2 Select the file to transfer to the SD card and then press SET.
] or [Load From
]
] submenu.
]
] depending on the operation you wish to perform.
[+ / Transfer File]
] submenu.
[+ / Transfer File]
[+ / Transfer File]
[+ / Transfer File]
[Copy To ]
[Load From ]
[Copy To Cam.]
[Load From Cam.]