Transferring Custom Picture Files - Canon XF100 Instruction Manual

Custom Picture Settings

Transferring Custom Picture Files

You can transfer custom picture files between the camcorder and SD card. When the custom picture file is in the
camcorder, use [Copy To b] or [Load From b] depending on the operation you wish to perform. Similarly,
when the custom picture file is on an SD card, use [Copy To Cam.] or [Load From Cam].
102
Copying a File from the Camcorder to an SD Card
1 After selecting a file in the camcorder, open the [Copy To b] submenu.
[H X Transfer File]
2 Select the file slot under which to save the file and then press SET.
• If there are available slots, you can select [New File] to save the file in
the first available slot.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the
SD card, overwriting the file in that slot.
4 Press the MENU button to exit the menu.
Replacing a File in the Camcorder with a File on an SD Card
1 After selecting a file in the camcorder to replace, open the [Load
From b] submenu.
[H X Transfer File]
2 Select the file to transfer to the camcorder and then press SET.
3 Select [OK] and then press SET.
• The file in the camcorder will be overwritten by the one on the SD
card.
4 Press the MENU button to exit the menu.
Copying a File from an SD Card to the Camcorder
1 After selecting a file on the SD card, open the [Copy To Cam.]
submenu.
[H X Transfer File]
2 Select the file slot under which to save the file and then press SET.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the
camcorder, overwriting the file in that slot.
4 Press the MENU button to exit the menu.
Replacing a File on an SD Card with a File in the Camcorder
1 After selecting a file on the SD card to replace, open the [Load From
Cam.] submenu.
[H X Transfer File]
2 Select the file to transfer to the SD card and then press SET.
3 Select [OK] and then press SET.
• The file on the SD card will be overwritten by the one on the
camcorder.
4 Press the MENU button to exit the menu.
[Copy To b]
[Load From b]
[Copy To Cam.]
[Load From Cam.]
[l Camera Setup]
Custom Picture]
[
[H X Transfer File]
[Copy To b]
[l Camera Setup]
[ Custom Picture]
[H X Transfer File]
[Load From b]
[l Camera Setup]
Custom Picture]
[
[H X Transfer File]
[Copy To Cam.]
[l Camera Setup]
Custom Picture]
[
[H X Transfer File]
[Load From Cam.]