Canon XF205 Instruction Manual page 127

NOTES
• When the camcorder is in infrared mode, the following adjustments are made automatically.
- Gain, shutter speed and aperture are adjusted automatically and ND filters are not used.
- AGC limit, light metering, AE shift, white balance and custom picture settings cannot be used.
- The camcorder will switch from manual focus to autofocus so the focus point may change. Check that the
focus is correct.
• Depending on the light source, autofocus may not work well while zooming.
• When the camcorder is in infrared mode, do not point the lens at strong sources of light or heat. The
camcorder's sensitivity to such sources is much higher than when shooting video normally. If there are such
sources in the picture before you switch the camcorder to infrared mode, shield the lens first.
• If you set an assignable button to [Infrared Monochrome] (A 129), you can press the button to change the
color of the bright areas of an infrared recording.
Infrared Recording
127