Canon XF205 Instruction Manual page 140

Custom Picture Settings
[Other Functions]
[Setup Level]: Adjusts the black level set by the [Black] and [Master Pedestal] settings. This setting can be
adjusted from -50 to 50. (Default: ±0)
[Over 100%]: This function determines how the camcorder handles video signals exceeding 100%. Available
140
options are [Through] to do nothing, [Clip] to clip the signal at 100%, and [Press] that
compresses a signal of up to 108% down to 100% levels. (Default: [Through])
NOTES
• When an optional RC-V100 Remote Controller is connected to the camcorder, the following custom picture
settings can be changed using the buttons and dials on the remote controller. They cannot be changed from
the camcorder while the RC-V100 is connected.
- [Black] > [Master Pedestal]; [Black] > [Master Black] > [Red], [Blue]
- [Black Gamma] > [Level]
- [Knee] > [Slope] and [Point] (only when [Knee] > [Enable] is set to [On])
- [Sharpness] > [Level]
- [White Balance] > [R Gain], [B Gain]