Soft Zoom Control - Canon XF205 Instruction Manual

Remote Operation Using Browser Remote
After completing the necessary preparations (A 182), you can operate the zoom remotely from a connected
device using the Browser Remote application.
Press one of the [ZOOM] controls on the Browser Remote screen to zoom as necessary.
• Press one of the controls on the [WIDE] (wide angle) side to zoom out or one of the controls on the [TELE]
(telephoto) side to zoom in.
• There are three levels of constant zoom speed - [

Soft Zoom Control

Using the soft zoom control function you can make the zoom start or end gradually when you operate the zoom
using one of the rockers on the camcorder, a remote controller or the Browser Remote application.
1 Open the [Soft Zoom Control] submenu.
[~ Camera Setup] > [Zoom] > [Soft Zoom Control]
2 Select [Start] (soft control only at the beginning of the zoom),
[Stop] (soft control only at the end of the zoom) or [Both], and
then press SET.
]/[ ] is the slowest and [
Zooming
]/[ ] the fastest.
[~ Camera Setup]
[Zoom]
[Soft Zoom Control]
[Off]
79