Using A Household Power Outlet - Canon XF205 Instruction Manual

Checking the Remaining Battery Charge
With battery packs compatible with Intelligent System, you can check the estimated remaining usage time of the
battery pack by looking at any recording/playback screen or the [Battery/Hour Meter] status screen (A 213).
You can also check the approximate remaining battery charge on the battery pack itself.
Press the CHECK button on the battery pack. An indicator will light for
approximately 3 seconds and show the approximate remaining battery
charge.
0-25%
26-50%
51-75%
76-100%
NOTES
• The first time you use a battery pack, charge it fully and then use the camcorder until the battery pack is
completely exhausted. Doing so will ensure that the remaining recording time will be displayed accurately.
• USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable.
Please call 1-800-8-BATTERY for information on how to recycle this battery.

Using a Household Power Outlet

You can also power the camcorder directly from a power
outlet using the supplied CA-930 Compact Power Adapter
and DC-930 DC Cable. While the camcorder is powered
from a household power outlet, you can safely replace the
battery pack even when the camcorder is on.
1 Set the Q switch to OFF.
2 Connect the DC cable to the DC IN terminal on the
camcorder.
3 Connect the power cord to the compact power adapter
and plug it into a power outlet.
4 Connect the DC cable to the compact power adapter.
IMPORTANT
• Turn off the camcorder before connecting or
disconnecting the compact power adapter.
Preparing the Power Supply
0
Battery charge indicator
DC IN
terminal
25
CHECK button
100%