Canon XF205 Instruction Manual page 125

6 Select [Stop] and then press SET.
• The front and rear tally lamps will go out, [ÜMP4] will change back to [MP4] and the MP4 clip is recorded
on the SD card.
• You can also set an assignable button to [MP4 Start/Stop] and press the assignable button.
NOTES
• If any memory card becomes full during MXF+MP4 simultaneous recording, recording will stop on all recording
media. If a memory card becomes full during MP4 backup recording, recording will stop only on the memory
card that is full and continue on other recording media.
• Simultaneous recording cannot be used together with other special recording modes or real-time proxy
transfer mode.
• While recording, the [Free Run] time code will be recorded with the MXF clip.
Simultaneous Recording of MXF and MP4 Clips
125