Canon XF205 Instruction Manual page 136

Custom Picture Settings
Gamma
Normal 2/3/4
136
[Black]
Controls the black level and color cast of blacks.
[Master Pedestal]: The master pedestal increases or decreases the black level. Higher settings will make dark
areas brighter but decrease contrast. This setting can be adjusted from -50 to 50. (Default: ±0)
[Master Black]: Corrects color cast in blacks.
[Red]: -50 to 50 (Default: ±0)
[Green]: -50 to 50 (Default: ±0)
[Blue]: -50 to 50 (Default: ±0)
[Black Gamma]
Controls the lower part of the gamma curve (dark areas of the image). When [Gamma] is set to [Wide DR], this
setting has no effect on the picture.
[Level]: Raises or lowers the lower part of the gamma curve. This setting can be adjusted from -50 to
50. (Default: ±0)
[Range]: Selects the range in which dark areas are affected. This setting can be adjusted from -20 to 50.
(Default: ±0)
[Point]: Determines the shape of the lower part of the gamma curve. This setting can be adjusted from -
20 to 50. (Default: ±0)
[Low Key Satur.]
Adjusts color saturation in dark areas.
[Enable]: Activates/deactivates the setting. (Default: [Off])
[Level]: Specifies how saturated colors are in dark areas. This setting can be adjusted from -50 to 50.
(Default: ±0)
Normal 1
Cine 1
Cine 2
Normal 4
Normal 3
Normal 1/2
Input
Black Gamma
Input
Normal 1
Wide DR
Input
Point