Canon XF205 Instruction Manual page 160

Video Output Configuration
HDMI OUT terminal and AV OUT terminal
Recording video configuration
Bit rate
160
1920x1080
1280x720
1
Onscreen displays can be superimposed and output to an external monitor (A 165).
2
[¢ Video Setup] > [MON.].
3
The zebra pattern can be output to an external monitor (A 89).
4
The video signal will change automatically depending on the capability of the external monitor.
5
MP4 clips only.
6
MXF clips only.
7
Only when [¢ Video Setup] > [3G/HD-SDI] is set to a setting other than [Compatible] and [¢ Video Setup] > [HDMI] is set
to [+1920x1080 59.94P].
Playback Video Configuration and Video Output Configuration by Terminal
Refer to the following tables for the video output configuration from each terminal, depending on the video
configuration of the clip being played back.
Operating modes:
3G/HD-SDI terminal and MON. terminal
Video configuration of the clip
Movie format
MXF
MP4
1
Onscreen displays can be superimposed and output to an external monitor (A 165).
2
[¢ Video Setup] > [MON.].
Frame rate
3
[HD]
5
59.94P 1080/59.94P
6
59.94i
29.97P 1080/59.94i
23.98P
59.94P
29.97P 720/59.94P
23.98P
Bit rate Frame rate
59.94i /
1920x1080 29.97P /
23.98P
59.94P /
1280x720 29.97P /
23.98P
1920x1080 / 59.94P /
1280x720 / 29.97P /
640x360 23.98P
1
HDMI OUT terminal output
2
[MON.] setting
[SD]
7
480/59.94i
3G/HD-SDI terminal
output
1080/59.94i
720/59.94P
1080/59.94P
AV OUT
terminal output
4 (SD output)
[Off]
7
1080/59.94P
1080/59.94i or
480/59.94P
480/59.94i
720/59.94P or
480/59.94P
1
MON. terminal output
2
[MON.] setting
[HD] [SD]
1080/59.94i
720/59.94P 480/59.94i
1080/59.94i
1