Reviewing A Recording - Canon XF205 Instruction Manual

Reviewing a Recording

Reviewing a Recording
When the camcorder is in
was recorded.
116
Operating modes:
1 Open the [Review Recording] submenu to set the review length.
[w Other Functions] > [Review Recording]
2 Select the desired option and then press SET.
3 After you finish recording, press the
• The last clip that was recorded is played back without
audio for the selected duration. [Ð REVIEW] appears at
the top of the screen.
• Press the CANCEL button to stop reviewing the clip and
change the camcorder back to record pause mode.
• After the clip finishes playing back, the camcorder returns
to record pause mode.
Options
[Entire Clip]: Allows you to review the entire clip.
[Last 4 sec]: Allows you to review just the last 4 seconds of the
clip.
NOTES
• Clips cannot be reviewed when using a special recording mode (A 118) or when the movie format is set to
MXF+MP4 (A 55).
• If the camcorder switched CF cards during the recording of an MXF clip, the camcorder will play back the clip
on the CF card most recently recorded on.
mode, you can review the last clip that
u
button.
[w Other Functions]
Review Recording]
[
[Entire Clip]