Manual Shutter - Canon XF205 Instruction Manual

Shutter Speed

Manual Shutter

When the shutter speed mode is set to manual, you can select to adjust the shutter as a shutter speed, angle
value, clear scan frequency or slow shutter speed according to your shooting needs.
60
Changing the Shutter Speed Mode and Value
1 Set the SHUTTER switch to ON.
2 Open the shutter [Manual] submenu.
[~ Camera Setup] > [Shutter] > [Manual]
3 Select the desired mode and then press SET.
• If you selected [Speed] (the default value), you can
select the increment scale to use when adjusting the
shutter speed; otherwise, skip to step 6.
4 Open the [Shutter Increment] submenu.
[~ Camera Setup] > [Shutter] > [Shutter Increment]
5 Select [Normal] or [Fine] and then press SET.
• If you select [Fine], you can adjust the shutter speed in
increments of up to 1/256 step.
6 Close the menu and change the shutter speed
mode to manual using the direct setting mode.
• Press SET and push the joystick left/right until the shutter speed mode
icon is highlighted in orange, select the
details refer to
7 Adjust the shutter speed, angle value or clear scan frequency
using the direct setting mode.
• Press SET and push the joystick left/right until the shutter value is
highlighted in orange, select the desired value and then press SET. For
details refer to
• If in step 3 you selected [Clear Scan], adjust the frequency so that
black bands do not appear on the screen.
NOTES
• If you set an assignable button to [Shutter Increment] (A 129), you can
press the button to change the shutter increment (steps 4-5).
Additionally, if you set an assignable button to [Shutter Mode], you can
press the button to change the shutter speed mode between manual
and automatic (step 6).
Remote Operation Using Browser Remote
After completing the necessary preparations (A 182), you can adjust the shutter speed remotely from a
connected device using the Browser Remote application.
1 Press the shutter speed mode button on the Browser Remote screen.
2 Select the desired mode.
3 Press the current shutter speed, angle value or clear scan frequency and select the desired value
from the list.
• You may need to scroll up/down to see all the available values.
• The selected value will be displayed on the Browser Remote screen and will be applied on the camcorder.
Using the Direct Setting Mode
Using the Direct Setting Mode
icon and press SET. For
(A 57).
(A 57).
[~ Camera Setup]
[Shutter]
[Manual]
[Speed]
[~ Camera Setup]
[Shutter]
[Shutter Increment]
[Normal]